pics of my highlifter snorkels
1 - 15 of 15 Posts
Joined
·
99 Posts
That friggin awesome!! Right on dashaint. Amphibious Kodiak!
Awesome looking quad!
Now you better get on working on the next project: relocating that LED bar...:grin2:
Looking at the pics I noticed that thing on your rear rack-yutrax?- and now I'm curious what is it? What if I need one and I just don't know it yet >
Now you better get on working on the next project: relocating that LED bar...:grin2:
Looking at the pics I noticed that thing on your rear rack-yutrax?- and now I'm curious what is it? What if I need one and I just don't know it yet >
Joined
·
83 Posts
thanks man,Awesome looking quad!
Now you better get on working on the next project: relocating that LED bar...:grin2:
Looking at the pics I noticed that thing on your rear rack-yutrax?- and now I'm curious what is it? What if I need one and I just don't know it yet >
you're right, i'm going to mount it on the two top bolts on the radiator top and center. It's a shame because i like the mirror mounts i have holding it to the handlebars. much easier to see with it on handlebars at night. That is next though
you can get the backrest here: http://www.cabelas.com/product/ATV-...c_id=shoppingebay&WT.z_mc_id1=03132624&rid=40
Joined
·
83 Posts
I did both kits myself, the instructions were good that came with the highlifter products. had to cut a hole in front and rear left side and run the air intake hose through the box, then silicone around it. also had to cut off the bar on the top front rack that raises up right before the handlebars.
only thing i have issue with is if i ever need to get into the battery box again it's going to be a *****. unfastening the radiator ubolts on the front rack and removing the pipes top side as well.
Joined
·
83 Posts
:smile2:Awesome looking quad!
Now you better get on working on the next project: relocating that LED bar...:grin2:
>
Attachments
Joined
·
83 Posts
Agreed, definitely dreading the day on that.
Further upgrades... probably the secondary spring, belt and maybe primary modded. not sure about the primary... may get another primary and get it modded and have both, so if i don't like it I can revert back. If i go to 30" tires it may need the primary sheeve modded. I'd really like to go to 30" if possible... silver backs at that. grizzly handle bars, better hand grips, some stick guards all the way around... a bluetooth speaker.... am sure something else will come along. so it seems i still have a list of things. getting there
Joined
·
83 Posts
looks just like their photo..
http://www.highlifter.com/p-4963-high-lifter-snorkel-yamaha-grizzly-700-and-kodiak.aspx
Joined
·
1 Posts
. Can you post pics of how you ran the pipe
Joined
·
62 Posts
highly recomend this product! https://rover.ebay.com/rover/1/711-...ash=item5d5fd0ab95:g:KPAAAOSwHHFZAQms&vxp=mtr defently if you like playing in the water!!
I just have a question regarding the snorkel. Did you have any issues with getting around wiring under where the snorkel is? And do you have much for aftermarket wiring in that area that had to be relocated? I've got my winch solenoid mounted in the hole beside the battery as well as the wiring for my lights and hour meter stuffed in there so just curious how much relocating i may need to do when it comes time. And same goes for the rad relocate as well, never really thought i needed one but had my temp light come on for the first time after burying myself in black mud yesterday. Sorry for all the questions.
1 - 15 of 15 Posts
Join the discussion
