Loading limits for front and rear racks
Join the discussion
Recommended Reading
-
Grizzly seat
Kodiak 700 Chassis & BodyI've put the grizzly seat on my 2020 Kodiak and it snapped right in and rides much better.. Eyeball measurement seem to show 1 inch thinker in the rear part and all the way up to the glove box... I am really happy with it. Found a good price for it at rocky mountain atv. The grizzly seat is...- 6
- 190
-
Alignment
Kodiak 700 Chassis & BodyI have noticed my new machine is out of alignment. Not sure if the front left is aligned to the front right... but the handle bars are not straight to go straight. I thought it might just be how the bar was mounted, but it isn’t. Any tips on aligning the steering column to the wheels? Or just...- 2
- 113
-
A slight grinding from the front diff
Kodiak 700 Chassis & BodyWhile riding yesterday, I noticed a small grinding sound when 4wd was engaged. And to ride in 2wd i could not hear anything bad. Today i decided to check the diff (in fear of water in diff) and sure nuff....alot of water, so then figured out that my driver side axle input is leaking, and has a...- 15
- 303
-
Jssrvlz · updated
-
Atv leans to ones the left side
Kodiak 700 Chassis & BodyOk have an issue with my kodiak that leans about 1/2 to the left front side. Nothing seems bent. Could it be the shock. When i jack up the atv left tire sits lower than the right. What i did notice which i will try to explain the best i can. With the atv lowered to the ground i count the...- 49
- 1K
-
Lubrication point questions
Kodiak 700 Chassis & BodyI have a 2019 450SE and have been doing all the regular matinenace, fluids/checks etc, but now it's time to do some lubrication on a few areas, e.g. knuckle pivots, and drive shaft u-joints. I see zerk fittings for the drive shaft, as well as for the rear suspension points. However, I have a...- 4
- 382
Join now to ask and comment!