Yamaha Kodiak 700 Forum banner
1 - 1 of 1 Posts

· Registered
1 Posts
Discussion Starter · #1 ·
New on here. Trying to find help with a issue caused by a rat. The connector for the lean angle sensor was chewed in half. Fortunately there was enough wiring to reconnect the chewed wires. Now it cranks and idle for 2 seconds then dies. Could it be that the way the connector is rewired is not enough to keep it running? Any help is very appreciated.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.