Member
Join Date: Jul 2019
Location: Bluff City, TN
Posts: 85
| Page 1 of 2 | 1 | 2 |
|
|
Thread Tools |
1 1/2" Spacers
Thinking of getting the Highlifter 1 1/2" spacers to widen the stance of my Kodiak, I am guessing this would add to the stability.
Can anyone else that's done this comment on the increased stability of the machine? In the end, was it worth doing?
Can anyone else that's done this comment on the increased stability of the machine? In the end, was it worth doing?
2019 Kodiak 700 EPS SE
26" Maxxis Zilla's / Warn VRx Winch / Light Bar
UNI air filter / Strong Made Front & Rear Baskets
JBS 18g Clutch weights / 1 1/2" HDM Spacers
Senior Member
Join Date: Jun 2018
Location: Northern Ontario Canada
Posts: 348
1" inch aluminum billet spacers at all four corners works awesome. 1.5" sure would be interesting
2009 Grizzly 550 Special Edition, Red Midnight Armour, EPS, 26"Pitbull Growler BG2.5 xor, on 12"polished alloy SE wheels with 1"spacers, Yamaha overfenders & windshield, Heat Demon grips & thumb warmers, 2500lbs Warn winch, two up seat / storage box, Moose rear bumper, Gold Plugs in diffs & engine, COOP45 machined sheave + 0.5mm shim (3.1:1), 18 gram weights, EPI Orange spring
Member
Join Date: Jul 2019
Location: Bluff City, TN
Posts: 85
Thanks Vincent, do they make it feel more stable on the off camber stuff?
2019 Kodiak 700 EPS SE
26" Maxxis Zilla's / Warn VRx Winch / Light Bar
UNI air filter / Strong Made Front & Rear Baskets
JBS 18g Clutch weights / 1 1/2" HDM Spacers
|
|
|
Senior Member
Join Date: Jun 2018
Location: Northern Ontario Canada
Posts: 348
Quote:
Originally Posted by Madmax
View Post
Thanks Vincent, do they make it feel more stable on the off camber stuff?
2009 Grizzly 550 Special Edition, Red Midnight Armour, EPS, 26"Pitbull Growler BG2.5 xor, on 12"polished alloy SE wheels with 1"spacers, Yamaha overfenders & windshield, Heat Demon grips & thumb warmers, 2500lbs Warn winch, two up seat / storage box, Moose rear bumper, Gold Plugs in diffs & engine, COOP45 machined sheave + 0.5mm shim (3.1:1), 18 gram weights, EPI Orange spring
Senior Member
Join Date: Feb 2016
Location: Nova Scotia, Canada
Posts: 484
With 1.5", I would think you will get accelerated bearing wear.
Member
Join Date: Jul 2019
Location: Bluff City, TN
Posts: 85
Took the plunge and ordered a set from Ebay, they're 1 1/2" ones made by Hdmoffroad.
2019 Kodiak 700 EPS SE
26" Maxxis Zilla's / Warn VRx Winch / Light Bar
UNI air filter / Strong Made Front & Rear Baskets
JBS 18g Clutch weights / 1 1/2" HDM Spacers
Senior Member
Join Date: Jun 2018
Location: Northern Ontario Canada
Posts: 348
Your going to notice a big difference compared to stock.
2009 Grizzly 550 Special Edition, Red Midnight Armour, EPS, 26"Pitbull Growler BG2.5 xor, on 12"polished alloy SE wheels with 1"spacers, Yamaha overfenders & windshield, Heat Demon grips & thumb warmers, 2500lbs Warn winch, two up seat / storage box, Moose rear bumper, Gold Plugs in diffs & engine, COOP45 machined sheave + 0.5mm shim (3.1:1), 18 gram weights, EPI Orange spring
Member
Join Date: Jul 2019
Location: Bluff City, TN
Posts: 85
You were right, big difference, much more stable! 
2019 Kodiak 700 EPS SE
26" Maxxis Zilla's / Warn VRx Winch / Light Bar
UNI air filter / Strong Made Front & Rear Baskets
JBS 18g Clutch weights / 1 1/2" HDM Spacers
Senior Member
Join Date: Jun 2018
Location: Northern Ontario Canada
Posts: 348
Yes, I'm sure it would make a big difference!
2009 Grizzly 550 Special Edition, Red Midnight Armour, EPS, 26"Pitbull Growler BG2.5 xor, on 12"polished alloy SE wheels with 1"spacers, Yamaha overfenders & windshield, Heat Demon grips & thumb warmers, 2500lbs Warn winch, two up seat / storage box, Moose rear bumper, Gold Plugs in diffs & engine, COOP45 machined sheave + 0.5mm shim (3.1:1), 18 gram weights, EPI Orange spring
Junior Member
MAHA
I have 2" on my 2017 eps se works great all in all and been on for 2 years no problems at all...
|
| Thread Tools | |
|
Show Printable Version Show Printable Version
Email this Page Email this Page
|
|
|
| Posting Rules | |